Paperback Lath

Paperback Lath is a diamond mesh lath incorporating both lath and asphalt impregnated paper that is factory bonded to the lath.

Showing all 3 results

  • apbdiamondmesh

    Paperbacked Diamond Mesh Lath

    USE: Asphalt paper is factory bonded to the back. The paper conforms to Federal Specification UU-B-790a, type 1, grade D, style 2.

    SIZE: 27″ x 97″ (686 mm x 2464 mm)

    END PAINTING: Same as non-paperbacked diamond mesh lath. Available in all offsets

    Category:
  • BPBselffurring

    Paperbacked Self-Furring Diamond Mesh Lath

    USE: Uses same mesh configuration as Diamond Mesh Lath but made with 1/4″ dimple indentations spaced 1-1/2″ o.c. each way. Used as exterior stucco base, column fireproofing and re-plastering over old surfaces. Available in galvanized only.

    SIZE: 27″ x 97″ (686 mm x 2464 mm)

    WEIGHTS:
    1.75 lbs/yd² – Black Banding
    2.50 lbs/yd² – Blue Banding
    3.40 lbs/yd² – Red Banding

    Category:
  • CPBVgroove

    Paperbacked V-Groove Mesh Lath

    USE: Same as V-Groove with asphalt paper factory bonded to the back. Paper conforms to Federal Specification UU-B-790a, type 1, grade D, style 2.

    SIZE: 27″ x 97″ (686 mm x 2464 mm)

    END PAINTING: Same as non-paperbacked diamond mesh lath.
    * Available in all offsets *

    • The paper is vapor permeable and meets Federal Specification UU-B-790a.
    • Used to install a base material and act as a water barrier at the same time.
    • Paper-backed galvanized lath is a recommended base and reinforcement for some exterior wall construction, including stucco and other machine or hand-applied exterior surfacing materials.
    Category: