Deflection
Showing all 4 results
-
Deflex Clip®
The Deflex Clips® allow for up to 1 1/2″ vertical floor or roof deflection without the use of laborious slip tracks it can be installed with or without standard leg tracks. Simple and fast to install which saves time and money. Two sizes available for 3 5/8″, 4″, 6″ and 8″ studs.
Material: 16 ga (54 mil) 50ksi.
Finish: Galvanized – G90
- 3T1000 accommodates 3 5/8″ and 4″ stud widths
- 6T1000 accommodates 6″ and 8″ stud widths
-
Outrigger
Outrigger Slide Clip is used for horizontal surface applications and offers the highest capacity of any horizontal surface connection clip. The outrigger comes in lengths of 18″, can be field cut to shorter lengths if needed. Simple and fast to install which saves time and money. One clip fits all stud sizes, no right or left hand clips.
Material: 16 ga (54 mil) 50ksi.Finish: Galvanized – G90
-
WSC 950 and WSC 1500
WSC 950 and 1500 Slide Clips provide lateral support for steel studs and allow for vertical movement of the building structure. They allow for 1 3/4″ edge of slab tolerance from the existing supporting structure. The WSC Clips accomodate up to 3/4′ vertical movement at intermediate floors and 1 1/2″ vertical movement at roof levels. They are used in a vertical surface application. Simple and fast to install which saves time and money. One clip fits all stud sizes, no right or left hand clips. Screws must be backed out 1/4 turn once installed.
Material: See Catalog TableFinish: Galvanized – G90
-
WSC Slide Clips
WSC Slide clips connect exterior curtainwall studs to the building structure and allow for vertical movement of the building independent of the studs. The new WSC series allows for 3″ total deflection, 1-1/2″ up and 1-1/2″ down. WSC series 14 ga. clips come with extended leg lengths and a bag of shouldered screws in each box of clips. 25 pieces per box.
Material: 14 ga (68 mil) 50 ksiFinish: Galvanized – G90