Newest Innovations
Stud + Joists
Accessories
Wall + Floor Sheathing
BUILDING JOINTS
Compressible
Control Joint
Specialty Clips
DEFLECTION
ClipSource is a comprehensive line of steel framing connectors thoughtfully designed to facilitate quicker, more cost-effective installation while assuring proper attachment.
Deflection connectors allow for secure attachment to the main structure while allowing vertical or lateral movement.
- Order by 2:00 PM for same day shipment.
- Use the same PO for all orders.
- No minimum order quantities*.
- No freight charges*.
* Conditions and exclusions apply. Contact your Marino\WARE representative for details.
SEE THE VALUE
PRODUCT DETAILS
WSC SLIDE CLIPS
Details
WSC Slide Clips connect exterior curtain wall studs to the building structure and allow for vertical movement of the building independent of the studs. The WSC series allows for 3” total deflection, 1-1/2” up and 1-1/2” down. WSC series 14 ga. clips come with extended leg lengths and shouldered screws are provided in each box of clips.
FINISH: Galvanized – G90
MATERIAL: 14 ga (68 mil) 50 ksi
OUTRIGGER
Details
Outrigger Slide Clip is used for horizontal surface applications. The outrigger comes in lengths of 18” and can be field cut to shorter lengths if needed. Simple and fast to install which saves time and money. One clip fits all stud sizes, no right or left hand clips.
MATERIAL: 16 ga (54 mil) 50ksi
FINISH: Galvanized – G90
DEFLECTION: 1-1/2” Total
WSC 950 & WSC 1500
Details
WSC 950 and 1500 Slide Clips provide lateral support for steel studs and allow for vertical movement of the building structure. They allow for 1-3/4” edge of slab tolerance from the existing supporting structure. The WSC Clips accommodate up to 3/4” vertical movement at intermediate floors and 1-1/2” vertical movement at roof levels. They are used in a vertical surface application. Simple and fast to install which saves time and money. One clip fits all stud sizes, no right or left hand clips. Screws must be backed out 1/4 turn once installed.
MATERIAL:
WSC 950: 16 ga (54 mil) 50ksi
WSC 1500: 12 ga (97 mil) 40ksi
FINISH: Galvanized – G90
DEFLEX CLIP®
Details
Deflex Clips® allow up to 1-1/2” vertical floor or roof deflection without the use of laborious slip tracks it can be installed with or without standard leg tracks. Simple and fast to install which saves time and money. Two sizes available for 3-5/8”, 4”, 6” and 8” studs.
MATERIAL: 16 ga (54 mil) 50ksi
FINISH: Galvanized – G90
- 3T1000 accommodates 3-5/8” and 4” stud widths
- 6T1000 accommodates 6” and 8” stud widths
DWSC Seismic Clip
Details
The DWSC series of clips allow for vertical and lateral movement of the building structure independent of the studs. The DWSC has a total of 3” vertical deflection and total of 2” lateral movement and uses shouldered screws which are included for ease of installation. 25 pieces per box.
MATERIAL: 14 ga (68 mil) 50ksi
FINISH: Galvanized – G90
