THE INDUSTRY IS CHANGING.
YOUR SAMPLE BOX SHOULD TOO.

What's in the Box?

SoundGuard^®
A patented interior framing system designed to easily construct partition walls with high STC ratings.

• Replaces typical partition and chase wall assemblies with equal or lesser wall thicknesses
• Handles just like a typical single stud
• Plumbing wall is available for easy access to mechanical, electrical, and plumbing

StudRite^®
Open web studs that boast high strength-to-mass ratios, excellent acoustic ratings, and reduced thermal transfer.

• Lighter and easy to handle, increasing safety
• Built-in pass-through capability for MEP contributes to fewer callbacks
• Excellent fire, acoustic, and thermal properties
• Performs very well in tall wall applications

GenieClip^®
Engineered for superior acoustical performance in reducing the transmission of airborne and impact sound through wall and floor-ceiling assemblies.

• Unlike resilient channel, it is impossible to short-circuit
• Only one screw required to attach to wood or metal wall studs or floor joists
• Engineered to allow reduction in assembly weight

Sound Gasket^®
Vinyl Accessory that provides smoke and sound ratings for both dynamic and static joints.

• Replaces acoustic sealant at joints
• Features a 3/8″ hollow bubble gasket on the upper corner that is easily compressed to seal against uneven concrete or fluted decks
• Once properly installed, Sound Gasket provides an unbreakable seal to provide long-term smoke and sound protection

Smoke and Sound Stop Blue
A compressible foam providing smoke and sound abatement for both dynamic and static joints.

• Easily installed by compressing it into the gap between the drywall and the surrounding structure
• Can be used in head-of-wall, bottom-of-wall, and wall-to-wall joints
• Provides up to 1/2″ of compression and extension

What's in the Box?

Fire Bead^®
Combines a vinyl bubble gasket, a perforated mud leg, and an intumescent strip to provide an aesthetically pleasing joint.

• 1 hr and 2 hr fire ratings
• Tested with up to 50% compression
• Can be used in top-of-wall, bottom-of-wall, and vertical joints

Fire Gasket^®
Preformed firestop composed of a vinyl frame with a bubble gasket and intumescent strip.

• 1 hr and 2 hr fire ratings
• Can be pre-installed to the track
• Tested with up to 100% compression AND 100% extension
• No additional firestop sealant or spray required over metal deck mineral wool flute fillers

Sound Gasket^®
Vinyl Accessory that provides smoke and sound ratings for both dynamic and static joints.

• Replaces acoustic sealant at joints
• Features a 3/8″ hollow bubble gasket on the upper corner that is easily compressed to seal against uneven concrete or fluted decks
• Once properly installed, Sound Gasket provides an unbreakable seal to provide long-term smoke and sound protection

HOTROD^® XL
Combines a flat deflection bead with compressible foam and intumescent tape for a perfect seal along head-of-wall joints.

• 1 hr and 2 hr fire ratings for both dynamic and static joints
• Tested with up to 80% compression and 30% extension
• Provides a single step installation of both a code compliant firestop and finished drywall accessory in one piece

HOTROD^® Type-X
A compressible intumescent fire-rated deflection bead that provides joint firestop solutions between flat concrete or fluted metal deck applications.

• 1 hr and 2 hr fire ratings for both dynamic and static joints
• Tested with up to 80% compression and 33% extension
• Installed at fluted deck, does not require use of additional firestop sealant or spray over mineral wool flute fillers

HOTROD^® Bottom Wall (BW)
A compressible foam that provides 1 & 2 hour bottom of wall joint firestop solutions for standard wall assemblies.

• Provides fire, thermal (F, T) & leakage (L) ratings
• Installs fully cured, unaffected by water, moisture, or temperature
• Premium STC ratings up to 56

FAS^®-093X™
Composite control joint constructed of metal with an integrated intumescent strip.

• 1 hr and 2 hr fire ratings
• Does not require drywall rips, fire sealant, or mineral wool backing within the wall cavity
• Can be used in INTERIOR drywall partitions

Smoke and Sound Stop Blue
A compressible foam providing smoke and sound abatement for both dynamic and static joints.

• Easily installed by compressing it into the gap between the drywall and the surrounding structure
• Can be used in head-of-wall, bottom-of-wall, and wall-to-wall joints
• Provides up to 1/2″ of compression and extension

FireRip^®
A composite steel angle encased in fire-rated drywall that provides unencumbered dynamic movement.

• Tested with up to 100% compression and 100% extension
• Can be used as a retrofit to repair or replace damaged fire-rated fill material
• Can be used with any UL-certified deep leg or slotted leg track
• L-rating less than 1 CFM

What's in the Box?

StudRite^® + JoistRite^®
Open web studs and joists that boast high strength-to-mass ratios, excellent acoustic ratings, and reduced thermal transfer.

• Lighter and easier to handle, increasing safety
• Built-in pass-through capability for MEP contributes to fewer callbacks
• Excellent fire, acoustic, and thermal properties
• Performs very well in tall wall applications

QuickFrame^® + QuickFrame^® Clip
Streamlines installation by reducing the number of components required to frame windows and doors.

• Eliminates built-up jambs and headers
• Simple 1-piece clip with pre-drilled holes
• Up to 50% reduction in assembly time

Firestopping
Marino\WARE Firestopping products are designed to maximize your efficiency and minimize your hassle on the jobsite.

• No cure time
• Minimal clean-up
• Immediate inspection