|
|
Lath & Lath Accessories
Diamond Mesh Lath |
|
 |
USE: Manufactured by slitting and stretching galvanized steel to
form small openings to allow the keying of plaster so it will bond to the lath.
Diamond Mesh Lath can be bent easily to create curved surfaces.
SIZE: 27" x 96" (686 mm x 2440 mm)
WEIGHTS:
1.75 lbs/yd² - (End Not Painted)
2.50 lbs/yd² - Regular (End Painted Blue)
2.50 lbs/yd² - Deluxe (End Painted White)
3.40 lbs/yd² - (End Painted Red)
|
1/8" Flat Rib Lath |
|
 |
USE: 1/8 inch Flat Rib Lath provides additional rigidity for horizontal
stucco applications. This product can also used extensively as a base for ceramic
tile.
SIZE: 27" x 96" (686 mm x 2440 mm)
WEIGHTS:
- 3.40 lbs/yd² - (End Painted Red)
|
3/8" High Rib Lath |
|
 |
USE: Superior spanning characteristics over common expanded metal
laths, suited for horizontal applications such as ceilings and soffits. Its 3/8"
deep ribbed configuration is a self-furring feature. Designed for application on
24" on center.
SIZE: 27" x 96" (686 mm x 2440 mm) |
V-Groove Mesh Lath |
|
 |
USE: For exterior stucco work over sheathing and as a plaster base
over masonry walls. Self-furring embossed “V” groove holds the lath away from the
surface to aid in the keying of stucco to the lath.
SIZE: 27" x 96" (686 mm x 2440 mm)
WEIGHTS:
3.40 lbs/yd² - (End Painted Red w/ Yellow Stripe) |
Self Furring Diamond Mesh Lath |
|
 |
USE: Uses the same mesh configuration as Diamond Mesh Lath but
made with 1/4" dimple indentations spaced 1-1/2" o.c. each way. Used as exterior
stucco base, column fireproofing and re-plastering over old surfaces. Available
in galvanized only.
SIZE: 27" x 96" (686 mm x 2440 mm)
WEIGHTS:
1.75 lbs/yd² - (End Not Painted, only Yellow Stripe)
2.50 lbs/yd² - Regular (End Painted Blue w/ Yellow Stripe)
2.50 lbs/yd² - Deluxe (End Painted White w/ Yellow Stripe)
3.40 lbs/yd² - (End Painted Red w/ Yellow Stripe) |
Strip Lath |
|
 |
USE: An expanded mesh product used to fill voids in wire lath construction
and as a base for wire lath patches.
|
CornerRite |
|
 |
USE: Expanded mesh component that is used as corner reinforcement
on interior angles where lath is not carried around and over non-ferrous bases such
as masonry and wood lath. |
|
Drywall Accessories Catalog
|
