ViperStud® Drywall Framing
| A High-Strength, Flat Steel Drywall Framing System
The ViperStud® Drywall Framing System offers all the benefits of conventional flat steel studs with a design that performs even better. The ViperStud drywall framing system is interchangeable with conventional framing components. Since ViperStud is flat steel, it is easy to plumb and mark, make minor adjustments and use laser levels. This makes installation the same as conventional studs. No extra training or special fasteners are required for installation.
Knurl & Rib Technology
The stud and track system utilizes a knurled flange and reinforcing ribs along with a flat stud design. Knurling is the pattern of small ridges formed on the flange to prevent screws from walking. Since knurling is only formed on one side of the steel, the stud stays flat, never compromising the strength or thickness of the steel.
ViperRib® technology applies a reinforced ribbing over the web and flange of ViperStud. The ribs provide added strength, are less prone to twist and creating ”high-shoulders” when finishing gypsum board. |
Click Here for Submittals
Click Here to Download the ViperStud Catalog
MW-Intertek CCRR-0154(ViperStud)
Click Here to Download the AER-17109 Viper20 Impact Boards Information |
Showing all 4 results
-
ViperStud ®
Yield Strength
- 50 ksi for Viper25™
- 70 ksi for Viper20™
Design Thicknesses
- Viper25™ is 0.0155″
- Viper20 is 0.0190″
Coating
- Per ASTM A1003/C645
Stud Web Sizes
- 1-5/8″, 2-1/2″, 3-5/8″, 4″ and 6″
Knockout Sizes
- 1-5/8″ stud = 3/4″ x 1-3/4″
- 3-5/8″, 4″ and 6″ stud = 1-1/2″ x 2-1/2″
-
ViperTrack™ (1-1/4″ Leg)
(Suitable for Viper20™ and Viper25™ studs)
Viper25
Yield Strength
- 50 ksi
Design Thickness
- 0.0155″
Coating
- Per ASTM A1003/C645
Track Web Sizes
- (inside dimensions)
- 1-5/8″, 2-1/2″, 3-5/8″, 4″ and 6″
Viper20 Track
- Design Thickness 0.0190″
- 50 ksi
-
Viper25™ Deep Leg Track
Yield Strength
- 50 ksi
Design Thickness
- 0.0155″
-
Viper20 Deep Leg Track
- 70 ksi
Design Thickness
- 0.00190